E2 micro ESD e-chains® are very small,
one-piece and two-piece e-chains®
with a low weight and are therefore
ideal for highly dynamic applications. E2 ESD micro e-chains® are stable and available in many versions. igus® also offers numerous accessories and mounting options.
Available inner widths Bi: 16 bis 30 mm Available bending radii R: 18 up to 38 mm Pitch: 20 mm / link = 50 links/m
* The required clearance height is HF = H + 10 mm (for 0,2 kg/m additional load) We request you to consult in case of especially restricted space ratios.
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch: 20 mmlinks per m: 50travel: SChain length = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run Reference example A:
Fill weight = 0,5 [kg/m]
Unsupported length FLB = 0,55 m
Travel = 1,1 m The diagrams for unsupported length apply to the standard e-chains® in igumid GLW material. The values can also be used for the assessment of applications of e-chains® in special material ESD. In case the respective maximum unsupported length exceeds by 80%, the suitability of the e-chain® must be ensured by a practical test.
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Other installation types
Option 1: Separators
Variant 1 - Separator
Separators can be placed anywhere in the chain's cross-section in order to divide up the interior of the e-chain® - As a standard feature, separators are fitted every 2nd chain link! Note: with the E2C. 10. Insert the interior separators before assembling the e-chain®!
Standard separator - E2.10.2.ESD
For easy vertical division in energy chains. Separator can be arranged in any position in the chain cross section. No snap-in option, freely movable.
Plastic - pivoting on both sides
Data protection declaration