zipper ESD e-chains® satisfy by their practicability and performance. The "zipper" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations.
The zipper series is one of the most popular
igus® e-chain® series in demanding
Available inner widths Bi: 16 up to 50 mmAvailable bending radiiR: 28, 38, 48 mmPitch: 20 mm per link = 50 links/m
* The required clearance height is HF = H + 15 mm (at 0,3 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch: 20 mmlinks per m: 50travel: SChain length = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run The diagrams for unsupported length apply to the standard e-chains® in igumid GLW material. The values can also be used for the assessment of applications of e-chains® in special material ESD. In case the respective maximum unsupported length exceeds by 80%, the suitability of the e-chain® must be ensured by a practical test.
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Mounting bracket with and without tiewrap plate
Rip-open chain Lid in one strip
5 widths, 3 bending radii
Other installation types
Supplement to installation instructions
EC Declaration of Conformity
Variant 1: Standard
Standard ESD separatorFor all usage situations. Separators are mounted every 2nd chain link as standard! Other shelving elements available on request.
Polymer - pivoting
080.06.12 - 080.20.12 : only centre holes080.30.12 - 080.50.12 : only outside holes
Data protection declaration