1. All-round mounting: with KMA mounting bracket
2. Economical: Through optimal utilisation of installation space
3. Easy filling: inner cross-section completely accessible
4. Precise division: notched crossbar with scale
5. Short assembly time: flip open in inner and outer radius at both ends
6. Without camber: NC version by reversing the outer link
7. Chip protection: Very close-tight end cap and bottoms
8. High stability: High forces through "undercut" design
9. Straight running: inner/outer link
* The required clearance height is HF = H + 40 mm (with 1 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly narrow space conditions.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endPitch: 46 mm per linkChain links per m: 22Travel: SChain length = S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
Diagram values are temporary!
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Standard
As standard, igus® separators are mounted every 2nd chain link!
31.2 Faster installation of cables
Secure seating on one side, with wide base, opposite
side narrow for easy installation of cables.
2300.x Horizontal division
Locks securely into separators at both ends, giving a fixed width. Can be used as full-width shelf for
integrated subdivision or as a partial shelf for
separation on 3 levels.
KMA - pivoting
KMA - locking
Support tray - Type 01
Data protection declaration