1. All-round attachment
2. Stable in the presence of large forces
due to "tongue and groove"
3. Straight running
4. NC without
5. Inner cross-section
for easy filling
6. Opening crossbars
can be folded open
on both sides
7. Can be opened
along the inner and outer radius
8. Lower weight,
better dynamic qualities
9. Quiet running due to
* The required clearance height is HF = H + 40 mm (at 3 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch: 67 mm per linkLink per m: 15Travel: SChain length = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run Reference example A:
Additional load = 2 [kg/m]
Unsupported length FLB = 3 m
Travel = 6 m
Chart values provisional!
Please call us.
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Variant 1: Standard
Variant 2: Standard
Standard 01 igus® separators are mounted every 2nd chain link as a standard!
48.1 Standard - for all uses
Separator, wide base for maximum retaining force
and stability in e-chains®
48.3 For many thin cables
Separator with narrow base for many thin cables
next to each other. Space-saving, stable - for e-chains® and e-chains®.
3200.x Horizontal division
Locks in securely at both ends of separator, secure width-fixing possible.
Can be used as a full-width shelf
for all-through partitioning or as a shelf for rack-like
separation on 3 levels.
Standard 02 igus® separators are mounted every 2nd chain link as a standard!
48.2 Faster installation of cables
Secure seating on one side, with wide base, opposite
side narrow for easy installation of cables (slightly clamping).
48.5 locks securely in 5mm steps Notched separator for notched crossbars with scale For exact positioning Ideal for applications turned 90°.
3200.x Horizontal division
Locks in securely at both ends of separator, secure width-fixing possible. Can be used as
a full-width shelf for all-through division or as a shelf for
rack-like separation on 3 level.
KMA - pivoting
Aluminum "SuperTrough", Basic Version
Aluminum "SuperTrough", Heavy Duty Version
Steel guide troughs
1. Trough side parts, aluminum, 2 m
2. Glide bar, plastic, 2 m
3. Glide strips*, lateral, 2 m
4. Bottom clamp, aluminum
5. C-profile, steel galvanized
6. Screw M6 x 16
7. Sliding nut M6
8. Interface connector "Basic", plastic
10. Optional: Silencer profile, rubber
*without glide strips on request
Aluminum "Super Trough"- the igus® standard
The Aluminum "SuperTrough" is a modular guide trough system for long travels (when E-Chains® glide on themselves, as per sketch). Aluminum "SuperTrough" is available in low cost "basic versions" and can be upgraded for heavy duty applications. This universal usage makes it the igus® recommended new standard trough system.
1. Connection element
2. Plastic glide bar
3. Bottom clamp
4. Glide strip
9. Heavy duty bracket
10. Silencer profile, rubber
11. Screw M6 x 20
1. Aluminium profile
3. Heavy duty bracket
6. Silencer profile
1. Guide trough (blue)2. Gliding rail (black)3. Assembly kit (red)4. Individual fastening without C profile5. Length of rail profile
+ Simple assembly due to assembly kits+ 2 piece design - adjustable to chain width+ very rugged+ cost-effective+ wide selection
Guide trough without gliding rails Part No. 93.30, guide trough with gliding rails Part No. 93.31
Assembly sets as butt joint part no. 93.50. XX
Guide tray type 02
Data protection declaration