2. Fast installation:
Can be opened along the inner and
Small pitch for
quiet and smooth running
High speeds and
rates of acceleration
5. Long service-life:
high tensile strength
6. Minimised abrasion:
No pins and
7. Modular design:
Can be shortened or lengthened
Inner widths Bi: 40 to 300 mmBending radii R: 75 to 200 mm
* The required clearance height is HF = H + 40 mm (at 2 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
A = Moving end, B = Fixed endPitch: 30 mmLinks per m: 34 links/1020 mmTravel: SChain lenghts = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run Reference example A:
Additional load = 1 [kg/m]
Unsupported length FLB = 1,6 m
Travel = 3,2 m
Chart values preliminary!
Please call us.
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Variant 1: Standard
E6.52.1 Standard - for all uses
Separator, wide base for maximum retaining force
and stability in e-chains®.
E6.52.2 Faster installation of cables
Firm seating on one side, with wide base, opposite side
narrow for easy installation of cables (slightly clamping).
2300.x Horizontal division
Locks in securely at both ends of separator, secure width-fixing possible.
Can be used as a full-width shelf
for all-through partitioning or as a shelf for rack-like
separation on 3 levels.
KMA - pivoting
Guide tray type 02
Data protection declaration