The E2/000 ESD series is igus® fourth generation
in this size. All field experience has been
incorporated into this series: easy and versatile assembly
combined with ruggedness - high strength
in combination with low-noise operation, long service life
for cables and a broad range of mounting options.
The design is
consistent within all E2/000 models. It is the standard
product trusted by machine builders
around the world.
Available inner widths Bi: 50 to 125 mmAvailable bend radii R: 63 to 150 mmPitch: 56 mm/link = 18 links/m
* The required clearance height is HF = H + 35 mm (with 2 kg/m fill weight), this should be taken into account for all application types.Please contact us if you have particularly narrow space conditions.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endPitch: 56 mmChain links per m: 18Travel: SChain length = S/2 + K
Unsupported length versus fill weightX axis: Unsupported length in m FLB/FLGY axis: Fill weight in kg/mLower scale: Travel S in mFLB = Unsupported with permissible sagFLG = Unsupported with straight upper run
The diagrams for unsupported lengths
apply to standard e-chains® in igumid GLW material. The values
can also be used for assessing e-chain® applications
in ESD special material.
If the respective maximum unsupported length exceeds 80%, the suitability of the e-chain® should be verified by a practice-oriented test.
from 10 m to max. 120 mChain length= S/2+K2Long travels - gliding (up to max. 120 m) Here, the e-chain® upper runs gliding on the lower run in a guide trough. We recommend letting our engineers support you when planning this type of system. In case of travel lengths between 5,0 and 10 m, we recommend a larger unsupported e-chain®.
A1 = Moving endA2 = Fixed end A3 = Guide trough with glide bar A4 = Guide trough with glide bar A5 = Total length of the guide trough
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
6 widths and 5 bend radii
2 mounting bracket variants
Different strain relief options are possible
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Supplement to the installation instructions
EC Declaration of Conformity
Option 1: Standard
Option 1 - Standard ESD separator
For all applications. Provides maximum holding strength
and secure stability. Separators are fitted
every 2nd chain link as standard! Other shelving elements
available on request.
"Super-aluminium", "Basic" guide trough
"Super-Alu" guide trough, "Heavy Duty"
Steel guide troughs
1. Trough side part, aluminium, 2 m
2. Glide bar, plastic, 2 m
3. Plastic glide strips*, side, 2 m
4. Clamping shoe, aluminium
5. C-profile, galvanised steel
6. Screw M6 x 16
7. Sliding nut M6
8. "Basic" connector, plastic
10. Silencer profile, rubber
*without glide strips on request
"Super-aluminium" trough - the igus® standard for guide troughs
The "Super" aluminium trough is a modular system of guide troughs for long travels (where e-chains® are gliding on top of themselves). The basic "Super" aluminium trough has a simple and cost-efficient designs and can be expanded for sophisticated plant engineering.
Its universal design makes it the recommended igus® standard for guide troughs.
1. Interface connector
2. Plastic glide bar
3. Clamping shoe
4. Glide strips
9. Heavy-duty bracket option
11. Screw M6 x 20
1. Aluminium profiles
3. Heavy-duty bracket option
6. Silencer profiles
1. Guide trough (blue)2. Glide bar (black)3. Installation set (red)4. Individual bracket without C-profile5. Profile rail length
+ Easy assembly using installation sets+ 2-part design - configurable from chain width+ Very stable+ cost-effective+ large selection
Guide trough without glide bars, Part No. 95.30, guide trough with glide bars Part No. 95.31
Installation sets, Part No. 95.50. XX
Support tray - Type 01
Data protection declaration