The ESD E4.1 system combines all the benefits
of its three predecessors and is the best system in the igus® e-chains® range. The E4.1 series are more stable with the same or smaller dimensions than their predecessors. Almost all accessory components and mounting dimensions are identical. With the igus® E4.1 system, the service life of your application can be increased still more and thereby lower costs.
Available inner widths Bi: 75 up to 300 mmAvailable bending radii R: 135 up to 250 mmPitch: 91 mm per link = 11 links/m
* The required clearance height is HF = H + 50 mm (at 3 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch: 91 mm per linkLink per m: 11Travel: SChain length = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run The diagrams for unsupported length apply to the standard e-chains® in igumid GLW material. The values can also be used for the assessment of applications of e-chains® in special material ESD. In case the respective maximum unsupported length exceeds by 80%, the suitability of the e-chain® must be ensured by a practical test.
starting at 12m up to max. 400mChain length = S/2+K2Long travels - gliding (up to max. 400m) In this case, the e-chain® upper runglides on the lower run in a guide trough. We recommend the project planning of such a system to be undertaken by our technicians. For travels between 10 and 12 m we recommend a larger unsupported E-Chain®.
A1 = Moving endA2 = Fixed end A3 = Guide trough with glide rail A4 = Guide trough without glide rail A5 = Overall guide trough length
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
6 widths und 5 bending radii
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Supplement to installation instructions
EC Declaration of Conformity
Variant 1: Standard
Standard ESD separator For all applications. Provides maximum holding power and secure positioning. Separators are mounted every 2nd chain link as standard. Other shelving elements available on request.
KMA - pivoting
Aluminum "SuperTrough", Basic Version
Aluminum "SuperTrough", Heavy Duty Version
Steel guide troughs
1. Trough side parts, aluminum, 2 m
2. Glide bar, plastic, 2 m
3. Glide strips*, lateral, 2 m
4. Bottom clamp, aluminum
5. C-profile, steel galvanized
6. Screw M8 x 20
7. Sliding nut M8
8. Interface connector "Basic", plastic
10. Optional: Silencer profile, rubber
*without glide strips on request
Aluminum "Super Trough"- the igus® standard
The Aluminum "SuperTrough" is a modular guide trough system for long travels (when E-Chains® glide on themselves, as per sketch). Aluminum "SuperTrough" is available in low cost "basic versions" and can be upgraded for heavy duty applications. This universal usage makes it the igus® recommended new standard trough system.
1. Connection element
2. Plastic glide bar
3. Bottom clamp
4. Glide strip
9. Heavy duty bracket, aluminum
11. Screw M8 x 25
1. Aluminium profile
3. Heavy duty bracket
6. Silencer profile
1. Guide trough (blue)2. Gliding rail (black)3. Assembly kit (red)4. Individual fastening without C profile5. Length of rail profile
+ Simple assembly due to assembly kits+ 2 piece design - adjustable to chain width+ very rugged+ cost-effective+ wide selection
Guide trough without gliding rails Part No. 94.30, guide trough with gliding rails Part No. 94.31
Assembly sets as butt joint part no. 94.50. XX
Guide tray type 02
Data protection declaration