1. All-round attachment
2. Stable in the presence of large forces
due to "tongue and groove"
3. Straight running
4. NC without
5. Inner cross-section
for easy filling
6. Opening crossbars
can be folded open
on both sides
7. Can be opened
along the inner and outer radius
8. Lower weight,
better dynamic qualities
9. Quiet running due to
* The required clearance height is HF = H + 40 mm (at 1 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch: 46 mm per linkLink per m: 22Travel: SChain length = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Provisional diagram values!
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Variant 1: Standard
Standard 01 igus® separators are mounted every 2nd chain link as a standard!
31.2 Faster installation of cables
Secure seating on one side, with wide base, opposite
side narrow for easy installation of cables (slightly clamping).
2300.x Horizontal division
Locks in securely at both ends of separator, secure width-fixing possible.
Can be used as a full-width shelf
for all-through partitioning or as a shelf for rack-like
separation on 3 levels.
KMA - pivoting
Guide tray type 01
Data protection declaration