1. Side plates in one piece 2. Ideal for high accelerations and speeds 3. Angle bracket for housing a strain relief tie wrap plate 4. Three-part design 5. Shortened as "required" 6. Accessories like shelving, strain relief available 7. Lifetime predictable 8. Hardly any polygon effect
* The required clearance height is HF = H + 40 mm (for 2 kg/m additional load) We request you to consult in case of especially restricted space ratios.
** The calculated length corresponds to the chain length without mounting brackets.
A = Moving end, B = Fixed endPitch: 15 mmlinks pro m: 67 links/1005 mmtravel: SChain length = S/2 + K Z = Distance of crossbars (standard: every 4th chain link, other distances on request)
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Reading example A:
Fill weight = 0,5 [kg/m]
Unsupported length FLB = 1,2 m
Travel = 2,4 m
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Fast assembly times due to side plate belts
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Variant 1: Standard
Option 2: Full-width shelves
Option 3: lower shelves
29.1 Standard – for all usage situations
Separator with wide base for maximum retaining force
and good stability in e-chains®.
29.2 Quicker cable installation
Fixed on one side with wide base, narrow opposite side
for easy cable installation (easy clamping).
2300.X Horizontal division
Locks in to the vertical separator at both ends. Fixed widths
possible. Can be used as a full-width shelf for consistent
division or as a shelf for rack-like
partitioning on 3 levels.
2. Full-width shelves
Strain relief tiewrap plate or strain relief with C rails can be locked in the last chain link.
Data protection declaration