1. Mounting bracket made of steel 2. Noise-reducing, optional –10 dB(A) 3. Glide surfaces, long travels 4. Chip protection 5. NC no camber 6. Rugged, high forcesdue to "tongue and groove" 7. Locking separator with reverse sidescale 8. Straight run due to inner-/outer-link design 9. Quiet operation due to integrated "brake"
* The required clearance height is HF = H + 100 mm (at 5 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch: 143 mm per linkLink per m: 7Travel: SChain length = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run Reference example A:
Additional load = 6 [kg/m]
Unsupported length FLB = 4,5 m
Travel = 9,0 m
Chart values preliminary!
Please call us.
starting at 12m up to max. 450mChain length = S/2+K2Long travels - gliding (up to max. 450m) In this case, the e-chain® upper runglides on the lower run in a guide trough. We recommend the project planning of such a system to be undertaken by our technicians. For travels between 10 and 12 m we recommend a larger unsupported E-Chain®.
A1 = Moving endA2 = Fixed end A3 = Guide trough with glide rail A4 = Guide trough without glide rail A5 = Overall guide trough length
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Variant 1: Standard
As a standard feature, igus® separators are fitted every 2nd chain link!Please observe minimum clearance from side links! e-tube: 32 mm
Slotted separator 6005
Fast installation - Can be retrofitted in existing
separation system without dismantling (top and
bottom notches cannot be used for installing intermediate shelves)
For shelf-like separation with intermediate shelves
420.X in height increments of 7 mm (in 15 levels).
Side plate 6002
same as separators. Allows a rack-like division up to the side links. No minimum gap necessary!
Intermediate shelf 420.X
For horizontal separation. Intermediate shelves can be arranged in height increments of 7 mm (15 levels) in various widths.
Steel - privoting
Steel - rigid
Data protection declaration