1. Enclosed e-tube - Protection against light dirt accumulation, weld spatter and environmental influences 2. No pin and hole connections, hardly any abrasion 3. Can be shortened or lengthened as required by modular structure. 4. Very large gliding surface 5. Inside stop dog 6. Small pitch for quiet, smooth run 7. KMA mounting bracket with "all around" fastening possibility (strain relief possible through separate chain tiewrap plates)
* The required clearance height is HF = H + 40 mm (at 2 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
A = Moving end, B = Fixed endPitch: 22 mmLinks per m: 46 linksTravel: SChain lenght = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Reference example A:
Additional load = 1,0 [kg/m]
Unsupported length FLB = 1,05 m
Travel = 2,1 m
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
41 widths and 7 bending radii
KMA - "all around" mounting brackets
Super quiet version!
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Separators
Guide tray type 01
Data protection declaration