1. Lightning-fast opening and closing
of lids by means of zipper band
2. Small pitch for quiet, smooth running
3. Protection against dirt and chips
4. Version with thicker pins and double stop system for long service life and long unsupported length
5. Zipper can be separated and joined together
at each chain link
6. Mounting bracket with integrated
strain relief possible
7. For high rates of acceleration
8. Also available as zipper
e-chain® Series 15
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch: 30,5 mmlinks per m: 33travel: SChain length = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run Reference example A:
Additional load = 0,75 [kg/m]
Unsupported length FLB = 0,85 m
Travel = 1,70 m
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Mounting bracket with and without tiewrap plate
4 widths and 7 bending radii
Enclosed engery tube with zipper
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
2. Full-width shelves
Option 1 - Separators They are used when a vertical division of the interior of the chain is necessary. Standard partition with separator, slotted R154, also for combinations with full-width shelf 111.X. Separators are mounted every 2nd chain link as standard.
Option 2 - Full-width shelves For use with many thin cables with similar or equal diameters.
Aluminum "SuperTrough", Basic Version
1. Trough side parts, aluminum, 2 m
2. Glide bar, plastic, 2 m
3. Glide strips*, lateral, 2 m
4. Bottom clamp, aluminum
5. C-profile, steel galvanized
6. Screw M6 x 16
7. Sliding nut M6
8. Interface connector "Basic", plastic
10. Silencer profile, rubber
*without glide strips on request
Aluminum "Super Trough"- the igus® standard
The Aluminum "SuperTrough" is a modular guide trough system for long travels (when E-Chains® glide on themselves, as per sketch). Aluminum "SuperTrough" is available in low cost "basic versions" and can be upgraded for heavy duty applications. This universal usage makes it the igus® recommended new standard trough system.
1. Connection element
2. Plastic glide bar
3. Bottom clamp
4. Glide strip
Data protection declaration