1. Large pins - long service life2. Torsional movements possible3. Version E, to be filled along outer radius4. Version Z, to be filled along inner radius5. Cable-friendly interior6. Mounting bracket with integrated strain relief possible7. Dirt-repellent outer contours8. Very easy to fill - Cables are simply pressed in9. Patented "pushbutton design" holds links together10. Available with 1 or 2-chamber system
(permanently injected multiple chamber system
for separate cable laying
Available inner width:2x37,2x50 mmAvailable bending radii R: 55 bis 200 mmPitch: 46 mm per link = 22 Links/m
* The required clearance height is HF = H + 40 mm (at 2,5 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
Opening crossbars overlap along the opening mechanism A=Moving end, B=Fixed endPitch: 46 mmLinks per m: 22Travel: SChain lenght = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
2 mounting bracket options
2 options and 5 bending radii
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Fixed interior separation
Polymer - pivoting
Polymer - locking
Data protection declaration