1. Very easy to fill - ideal for applications with preassembled plugs 2. Small pitch for quiet, smooth run 3. Limited torsional movement possible 4. Light-weight 5. "Push-button design" holds links together 6. Cable-saving inner space 7. Version E, filled along the outer radius 8. Version Z, filled along the inner radius 9. Mounting bracket with integrated strain relief possible
Available inner widths Bi: 10 up to 20 mmAvailable bending radiiR: 18, 28, 38 mmPitch: 20 mm per link = 50 links/m
* The required clearance height is HF = H + 10 mm (at 0,2 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
Overlap at the opening mechanism, except for the width 10 and 16 gap size 5,5 mm Special Series with 3,5 mm gap: E06.10.018.0.S3 A=Moving end, B=Fixed endPitch: 20 mmLinks per m: 50Travel: SChain lenght = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Mounting bracket with and without strain-relief teeth
Other installation types
Polymer - one-piece
Data protection declaration