1. Torsional motion possible 2. Small pitch for quiet, smooth run 3. Very easy to fill-ideal for applications with preassembled plugs 4. Cable-saving inner space 5. Version E, filled along the outer radius 6. Version Z, filled along the inner radius 7. Mounting bracket with integrated strain relief possible 8. "Push-button design" holds links together
Available inner widths Bi: 23 bis 100 mmAvailable bending radii R: 40, 60, 75, 100 mmPitch: 30,5 mm per link = 33 Links/m
* The required clearance height is HF = H + 15 mm (at 0,3 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
Opening crossbars overlap along the opening mechanism A=Moving end, B=Fixed endPitch: 30,5 mmLinks per m: 33Travel: SChain lenght = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Mounting bracket with and without tiewrap plate
6 widths and 4 bending radii
Polymer - one-piece
117.2.12 - 117.4.12: only centre holes117.5.12 - 117.7.12: only outside holes
Data protection declaration