1. Torsional movements possible 2. Very easy to fill- ideal for applications with preassembled plugs 3. "Push-button design" holds links together 4. Small pitch for quiet, smooth run 5. Cable-saving inner space 6. Version E, filled along the outer radius 7. Version Z, filled along the inner radius 8. Mounting bracket mit integrierter with integrated strain relief possible
Available inner widths Bi: 15 up to 50 mmAvailable bending radii R: 28 up to 125 mmPitch: 30,5 mm per link = 33 links/m
* The required clearance height is HF = H + 10 mm (at 0,2 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
Opening crossbars overlap along the opening mechanism A=Moving end, B=Fixed endPitch: 30,5 mmLinks per m: 33Travel: SChain lenght = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Mounting bracket series E14 / Z14
4 widths and 6 bending radii
Other installation types
Polymer - one-piece
Data protection declaration