1. Very easy to fill- ideal for applications with preassembled plugs 2. Small pitch for quiet, smooth run 3. Limited torsional movement possible 4. Light weight 5. "Push-button design" holds links together 6. Cable-saving inner space 7. Version E, filled along the outer radius 8. Version Z, filled along the inner radius 9. Integrated strain relief possible
Available inner widths Bi: 10 up to 50 mmAvailable bending radiiR: 28, 38, 48 mmPitch: 20 mm per link = 50 links/m
* The required clearance height is HF = H + 15 mm (at 0,3 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
Overlap at the opening mechanism, except for the width 10 und 16 gap size 5,5 and 4 mm A=Moving end, B=Fixed endPitch: 20 mmLinks per m: 50Travel: SChain lenght = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Other installation types
Polymer - one-piece
080.06.12 - 080.20.12: only centre holes080.30.12 - 080.50.12: only outside holes
Data protection declaration