1. Very easy to fill - ideal for applications with preassembled plugs 2. Small pitch for quiet, smooth run 3. For high accelerations 4.Limited torsional movements possible 5. Smooth inner contour 6. Mounting brackets available 7. "Push-button design" holds links together
Available inner widths Bi: 7 mmAvailable bending radii R: 15 up to 48 mmPitch: 16,7 mm per link = 60 Links/m
* The required clearance height is HF = H + 10 mm (at 0,1 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
Gap size at the opening mechanism: 1-2,5 mmper widthExcept E04.07.015.0.S with 0,8 mm width A=Moving end, B=Fixed endPitch: 16,7 mmLinks per m: 60Travel: SChain lenght = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
1 width und 5 bending radius
Other installation types
Polymer - one-piece
Data protection declaration