1. KMA mounting brackets2. Rigid or pivoting mounting brackets available3. R98: Swivelable and removable lid4. R98: Removable shelves5. Combinable tube and chain6. Integrable strain relief elements7. 50/51: Crossbars removable on both sides
Available inner widths: 75 bis 462 mmAvailable bending radii: 200 up to 1000 mmPitch: 91 mm per link = 11 links/m
For new designs, we recommend the technically optimised e-chain® series R4.80 from the igus® E4.1 construction kit.+25% more unsupported length, higher stability and tensile strength, same measurements and mounting dimensions Series R98 is available in limited quantities ex stock. Product support and storage will be restricted from 2012. For any questions, please contact your igus® contact. Thank you for your understanding
To series R4.80
* The required clearance height is HF = H + 60 mm (at 3 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch: 91 mm per linkLink per m: 11Travel: SChain length = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Variable interior separation available
3 mounting bracket options
Variable widths through extension links
10 widths und 10 bending radii
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
2. Intermediate shelves
Separators can be placed at any point along a chain's cross section. Thanks to its wide base, the standard separator with part no. 501 is extremely stable, even with thick cables/hoses.
With the various elements of the interior separation, the E-Chains® and energy tubes can be divided both vertically and horizontally. Side plates and shelves form the basic grid of an interior separation system. At the height grid of 7 mm, shelves of various widths can be arranged in 11 levels. You can find recommendations for allocation in the section, Design data When assembling the slotted separator "open" the top and bottom "grid level" cannot be occupied by a shelf.
KMA - pivoting
Steel guide troughs
1. Guide trough (blue)2. Gliding rail (black)3. Assembly kit (red)4. Individual fastening without C profile5. Length of rail profile
+ Simple assembly due to assembly kits+ 2 piece design - adjustable to chain width+ very rugged+ cost-effective+ wide selection
Guide trough without gliding rails Part No. 96.30, guide trough with gliding rails Part No. 96.31
Assembly sets as butt joint part no. 96.50. XX
Data protection declaration