For new constructions, we recommend the technically improved e-chain® series 2500 from the igus® E2/000 range.Secure hold of the crossbars, improved opening system, greater unsupported lengths and same dimensions Series 25 is available in limited quantities ex stock. Product support and storage will be restricted from 2012. For any questions, please contact your igus® contact. Thank you for your understanding
to the E2/000 Series 2500
* The required clearance height is HF = H + 25 mm (at 1.5 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
A=Moving end, B=Fixed endTeilung 46 mmLinks per m: 22Travel: SChain lenght = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1: Separators
Option 2: Full-width shelves
Interior separation of the Series 25: For the interior separation of the Series 25, there are 2 options: Option 1: Separators
Separators: Freely usable and movable Separators are an option to partition the interior of the flip open chain of the type 25, and are mainly used in side-mounted chains. Option 2: Separators/Full-width shelf
An interior separation with full-width shelf is available for the E-Chains® 25.3, 25.4. and 25.5.
Option 1, steel, one-piece
Option 2, steel, two-piece
Option 2, steel, one-piece
Steel guide troughs
1. Guide trough (blue)2. Gliding rail (black)3. Assembly kit (red)4. Individual fastening without C profile5. Length of rail profile
+ Simple assembly due to assembly kits+ 2 piece design - adjustable to chain width+ very rugged+ cost-effective+ wide selection
Guide trough without gliding rails Part No. 92.30, guide trough with gliding rails Part No. 92.31
Assembly sets as butt joint part no. 92.50. XX
Data protection declaration