1.Large pins - long service life2.Cable-saving inner space3. Dirt-resistant 4. Favorable inner/outer dimensions ratio5. Integrable strain relief.6. Double stop dog7.Series 27i (snap open on the inside), 27 ( snap open along the outer radius)
Available inner widths Bi: 50 up to 200 mmAvailable bending radii R: 63 up to 250 mmPitch: 56 mm per link = 18 links/m
For new constructions, we recommend the technically improved e-chain® series 2700 from the igus® E2/000 range.Secure hold of the crossbars, improved opening system, greater unsupported lengths and same dimensions Series 27 is available in limited quantities ex stock. For any questions, please contact your igus® contact. Thank you for your understanding
To the E2/000 series 2700
* The required clearance height is HF = H + 35 mm (at 2 kg/m additional load), this should be observed for all types of applications.Please consult igus® if space is particurlarly restricted.
** The calculated length corresponds to the chain length without mounting brackets.
A = Moving end, B = Fixed endPitch: 56 mmLinks per m: 18Travel: SChain lenght = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
7 widths and 8 bending radii
Interior separation in 3 options
5 mounting bracket options
Various strain relief systems possible
Available in many colors
Design specificationFurther information on "unsupported application"
Design specificationFurther information on "gliding application"
Other installation types
Option 1 - Separators
Option 2 - Full-width shelves
Option 3 - Shelves
This option is only available for snap-open 27/27i chains. It is expedient when using multiple thin cables with similar or identical diameters. These versions fill the entire inner width of the chain.
This option exists for the flip open chains of the 27/27i type. It makes sense when many cables with different diameters are used. Continuous shelving from one side of chain to the other as well as partial divisions in individual blocks can be implemented.
Polymer - pivoting
Polymer - locking
KMA - pivoting
Aluminum "SuperTrough", Basic Version
Aluminum "SuperTrough", Heavy Duty Version
Steel guide troughs
1. Trough side parts, aluminum, 2 m
2. Glide bar, plastic, 2 m
3. Glide strips*, lateral, 2 m
4. Bottom clamp, aluminum
5. C-profile, steel galvanized
6. Screw M6 x 16
7. Sliding nut M6
8. Interface connector "Basic", plastic
*without glide strips on request
Aluminum "Super Trough"- the igus® standard
The Aluminum "SuperTrough" is a modular guide trough system for long travels (when E-Chains® glide on themselves, as per sketch). Aluminum "SuperTrough" is available in low cost "basic versions" and can be upgraded for heavy duty applications. This universal usage makes it the igus® recommended new standard trough system.
1. Connection element
2. Plastic glide bar
3. Bottom clamp
4. Glide strip
9. Heavy duty bracket
10. Silencer profile, rubber
11. Screw M6 x 20
1. Aluminium profile
3. Heavy duty bracket
6. Silencer profile
1. Guide trough (blue)2. Gliding rail (black)3. Assembly kit (red)4. Individual fastening without C profile5. Length of rail profile
+ Simple assembly due to assembly kits+ 2 piece design - adjustable to chain width+ very rugged+ cost-effective+ wide selection
Guide trough without gliding rails Part No. 92.30, guide trough with gliding rails Part No. 92.31
Assembly sets as butt joint part no. 92.50. XX
Data protection declaration