mounting bracket with
strain relief option,
Quick flange optional
Very smooth contours -
ideal cable care
4. Low noise:
Angular stop dog system
for high fill weights
non-openable or snap-open
along the inner or outer radius
along both sides
7. With free opener: Open 1 m in 2 seconds
E2 micro chain opener video
* The required clearance height is HF = H + 15 mm (for 0,3 kg/m additional load) We request you to consult in case of especially restricted space ratios.
** The calculated length corresponds to the chain length without mounting brackets.
A= Moving end, B= Fixed endPitch: 20 mmlinks per m: 50travel: SChain length = S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run Reference example A:
Fill weight = 0,75 [kg/m]
Unsupported length FLB = 0,78 m
Travel = 1,55 m
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
Other installation types
Option 1: Separators
Option 1 – Separators and full-width shelvesSeparators can be arranged at any position in the chain cross section to divide the interior of the e-chain®. They are mounted on every 2nd chain link as standard! Note: with the E2C. 15. Insert the interior separators before assembling the e-chain®!
Standard separator - E2.15.2
For easy vertical division in energy chains. Slot in the separator enables vertical/horizontal partitioning. No snap-in option, freely movable.
E2.15.5 - Locks in securely in 2.5 mm increments
The locking separator can be positioned exactly. Ideal for applications turned 90°. Separators have cable friendly rounded design.
Full-width shelf 110.X
Recommended if many thin cables with similar
or the same diameters are used. or integrated subdivision
Polymer - locking
Plastic, pivoting on one side
Plastic - pivoting on both sides
Data protection declaration