1. KMA, flange or angle mounting brackets available2. Combination of different bending radii and moving directions3. Closed all around4. Excellent protection against dirt accumulation and chipping5. Cost effective design for complex motions6. Separation and connection possible at every position7. High tensile force
** The calculated length corresponds to the chain length without mounting brackets.
Travel: SPitch: 36 mmLinks/m: 28 (1008 mm)Dimension E: 25 mmBa: 96 mmChain lenght: S/2 + K
The unsupported length is dependent on the additional load X-axis: Unsupported length in m FLB/FLG Y-axis Additional load in kg/m Lower scale: Travel S in m FLB = unsupported with permitted sag FLG = unsupported with straight upper run
Hint: Unsupported lengths for single-axis movement only!
Samples and catalog order
E-Chain® Expert call
Service life calculation
Ask the product expert
Designing with igus®
3 mounting bracket options
Several bending radii
Interior separation possible
Design specificationFurther information on "unsupported application"
Option 1: Separators
For the interior separation of the igus® triflex® systems, freely applicable separators are available. They can be used for both vertical and horizontal sub-division. If the separators are assembled every other link and turned 90°, the tube can be sub-divided into four segments. We recommend that you order pre-assembled tube, since a subsequent assembly of separators is possible only after the tube is dismantled.
Option 1 mounting bracket flange
Option 2 angle mounting bracket
Option 3 mounting bracket KMA
Data protection declaration